Access Control in Hayward
Buzzer panels, electric strikes, keypads and fobs for lobbies and offices. The entries get walked, then the quote comes as a single itemized number.
custom quote
Typical price
24 min
Avg. arrival
24/7
Availability

The trouble with a key is that once it is out of your hand you cannot take it back. A credential is switched off from a laptop on a Sunday evening and that is the end of it. Everything Eden Locksmith does under access control sits on that difference: a badge reader on the staff entrance of a warehouse near Industrial Boulevard, a keypad on the alley door of a Mission Boulevard restaurant, a logging reader on the records room of an office near Southland, phone credentials on an apartment building whose buzzer panel has been rewired twice and still rings unit 4 when a visitor presses unit 7, and a gate keypad on a townhome court near Eden Shores. One keypad on one door or a networked set with a log, the approach is the same.
The survey walks each door and writes down three things: what the door is made of, what is in it now, and how far the nearest power and network points are. Those answers pick the hardware, not a catalog. A wood or hollow-metal door with a deep frame takes an electric strike. A glass-and-aluminum storefront door with a two-inch stile takes a magnetic lock at the head instead. A yard gate ties into the operator already installed. On apartment buildings the buzzer panel gets special attention, because the wiring behind those panels has usually been changed by three different hands over thirty years; every button is rung against every unit and the directory is relabeled with the actual unit numbers before anyone signs anything off. Controllers are sized with two spare positions for doors you add later. The credential is whatever your people will genuinely carry, which is a phone more often than a card. You enroll the first users at the screen with the technician beside you and you keep an administrator login in your own name. One door in every building keeps a mechanical cylinder on a restricted key, because a building with no key anywhere is one power cut away from being shut out of itself.
Access control is quoted per project. Door count, controller, credential type and the condition of each door move the number too far for one published figure to be honest. The quote separates every door, its hardware, the controller, the credentials and the labor, so nothing hides inside a lump sum. The $89 service call is the survey and it counts toward the job. After you approve, the quote holds; if a door turns out to need preparation nobody could see from the hallway, it is explained and agreed as its own line while the work is going on, never discovered afterward on an invoice.
You call and say what happened or what you need: how many doors, what kind of building, and whether a buzzer panel is part of it. The survey is booked, and the figure comes back as an itemized quote. Installation is scheduled once you approve. The van leaves Jackson Street on the day, and a text names the technician and gives a thirty-minute window. Every door is tested from outside with a credential and from inside against the exit sensor, every buzzer button is rung against its unit, and the handover covers adding, removing and scheduling users. The receipt shows the figure from the call, door by door.
“I manage sixty units across three buildings for an owner who lives out of state, and two lobby doors had stopped holding once the buzzer let them go. He walked all three entries, counted the strikes and the panels, and came back with one number for the lot instead of guessing at it. The work was clean and the doors have latched every time since. Four stars only because the summary the owner wanted took two days to reach me rather than arriving with the receipt.”
Every job is priced from the list below. The figure is said while you are still on the phone, and the receipt shows the same figure whatever the technician finds at the door.
- Daytime (7am–8pm)standard rates
- Evening (8pm–12am)+$45
- Overnight (12am–7am)+$80
FAQ
Access Control: quick answers
Our building on Tennyson has a buzzer panel that rings the wrong units and half the tenants prop the street door open. What fixes that?+
Two things, in order. First the panel is rung out button by button and the directory is corrected to the real unit numbers, which is most of the complaint. Then the street door gets a credential tenants will actually use, usually a phone or a fob, plus a call button that rings a tenant's mobile wherever they are, so nobody has to run down. A door that opens easily for the people who live there is a door that stops getting propped.
I need a record of who went into the stock room at our shop and when.+
A networked reader on that door writes one, with a name, a date and a minute, and exports to a spreadsheet whenever you want it. Codes shared between staff defeat that, so give each person their own credential rather than one door code. The restricted mechanical override for the same door is held by one named person and its use shows in the log as well.
Our lobby door is a sheet of glass in a thin aluminum frame. There is nowhere to put a strike.+
That is correct, and it is why those doors take a magnetic lock across the head of the frame instead. Inside, a motion sensor above the door and a button beside it release it on the way out. The deadlatch already in the stile stays where it is, so the door can still be locked with a key at night once the maglock is powered down.
Related
More commercial services
24/7 — nights, weekends & holidays
The van is already in town, and the number comes before it moves
Hayward, San Lorenzo, Cherryland and Ashland, San Leandro, Castro Valley and Union City, 24/7, holidays included. Describe the door, hear one number with the $89 visit inside it, and the lock gets opened without damage wherever it can be. The receipt says what the call said. It runs the same way whether the lease is in your name or the deed is.